15208 Genuine Meyer Lift Ram Chrome Rod 6" E47 E60 E57 Classic Plow Snow Plow

This is a Genuine Meyer lift ram, we also sell them aftermarket. 

This part is known for having pits. We put new ones in every pump we rebuild. If you have any pits at all, it can tear the seals and take in water. So replace this part. This is for any of the standard height pumps. The Meyer part # 15208 is a 6" x 1-1/8" rod. If you have an H model pump, that is an 8" stroke and you would need part # 15206.

When this is out of the pump, the overall length is 11-1/8", the length not counting the stud at the bottom is 9-1/8", the pin hole is 5/8", the stud takes a 1/2" nut and the ram is 1-1/8"

This ram was used in these pumps: E-47, E-46, E-45, U13, E-60, E-57, E-48 and E-50.

Make sure you also pick up a basic seal kit, the Genuine Meyer fluid you need and the Meyer yellow paint to do a proper rebuild. If you are doing this yourself, below we have links to the service manuals to walk you through the rebuild.

E-47, E-46 Complete Service Rebuild Manual

E-47, E-46 Parts Break Down

E-47H, E-46H Parts Break Down

E-60/E-60H Complete Service/ Shop/ Rebuild Manual

E-60 Pump Parts Break Down