This is an aftermarket cylinder, Meyer no longer sells these.
The Meyer E60 had 3 cylinder options, so make sure this is what you need. This is the original, most common 6" cylinder, it is 7x5/16 part # 15694.
This cylinder is discontinued from Meyer, this is a direct replacement for the original 15694.
The Meyer E60 had 3 cylinder options, so make sure this is what you need. This is the original, most common 6" cylinder, it is part # 15694. They now sell an updated one with a larger bore 15693 for more lifting power but you will also need the brass followers to go with it (comes in kit 08839 listed in related products.) This is the inner cylinder. These get pitted and rip up the packing cup. If yours is not perfectly smooth inside, replace it. This is for the regular height pumps, not the H. The H pumps are 2" taller than standard, they are used on Diamond plows, Meyer MDII and Plus mounts. If you have the H, you will need 15205.
The inside diameter is 1-1/4" and the length is 7-5/16"
Make sure you also pick up a basic seal kit, the Genuine Meyer fluid you need and the Meyer yellow paint to do a proper rebuild. If you are doing this yourself below we have link to the service manuals to walk you through the rebuild.
