64775 90" x 1/2" Cutting Edge for 7'6" Western Pro Plus Midweight Wideout Blizzard 7600LT 7600HD Plows 40695
The 64775 Western Cutting Edge for some Western, Blizzard and Snowex plows.
This is the 64775 / 40695 1/2" cutting edge for Western 7'6" Pro Plus and Wide-Out plows.
This is also the same as the HTS, Midweight and Blizzard 7'6" straight blade plows but they use the 3/8" or 5/16" thickness so this is an upgrade for part numbers 69499, 69505, and 28594. This one is 1/2", but will fit the same hole pattern.
This edge comes in 5/16" (69505 & 69499,) 3/8" (28594 & 42417,) and 1/2" (64775 / 40695.)
We also offer these in aftermarket.
You can find the placement and installation instructions for this cutting edge at this link.
Make sure yours matches these measurements. There are 10 bolt holes, 1-1/4" down from the top. From the end toward the middle, they measure at 2.5", 5.5", 12.5", 25.5" .....
Type | Bolt on wear edge |
---|---|
Edge material | Steel |
Edge Thickness | 3/8" |
Edge width | 7'6" (90") |
Plow Brand | Western, Blizzard |