Western Fisher MVP V Plow EZ V 3 Port 3 Plug Wiring Kit Isolation Module Truck Side Minute Mount Ultramount Unimount

In the drop downs above, you need to select the correct module and light adapters. Click here to use the Power Match to get the correct light harness.

This is the complete truck side wiring kit for Western MVP or Fisher EZ-V plow. (Will not work on Fleet Flex MVP Plus or Extreme V.) The early V plows had several versions of wiring. There is a relay style that 2-plug and a 3-plug both used - a 12 pin light harness. Then there was the 3 port or 4 port Isolation Module. These are 3 plug with an 11 pin light harness.

This listing is for the 3 plug 3 port isolation module. If you have a 2 plug plow, you will also need the plow side to use this. You will also need the control if you don't have it already. What you get here is the 3 port module, 63411 truck side power cable, 26346 7 pin control harness, the 10 pin connector, 26357 truck side light harness, 56131 motor solenoid, 22511 power wire, 29047 3 Port Module Adapter and then your choice of headlight adapter to fit your truck. We also recommend getting a tube of dielectric grease to protect these plugs. If your plow is a 2-plug system, you also need this 28054 to convert it over to 3-plug.  

A nice feature about this harness is that with a small adapter you can plug into and also run a straight blade.

Note: Western and Fisher now use a Multiplexing system. If your control has 4 pins instead of 6 and 2 plugs in the grille instead of 3, this is not the correct wiring for your plow. This is on the New V plows only.

Here is a link to the Wiring Schematics Guide.